TPE Soft Touch - 60 Shore A

TPE Soft Touch - 60 Shore A

TPE Soft Touch is resistant to abrasion and provides a silky feel, it suggests high-quality touch, suitable for applications with velvety surfaces and requirements for wear resistance it presents a good adhesion to polar thermoplastics.

This TPE is mainly used for automotive interior, remote controls, cell phone covers, cosmetic packaging, wearables, etc.


Download the data sheet



Main 3D printing parameters

Advised nozzles Brass 0.6 | 0.8 | 1.0 | 1.2 mm
Printing temperatures 190 - 230°C
Buildplate substrate PEI film | PC film | PA film
Builplate temperature 50 - 80°C

Typical properties

Hardness
60 Shore A
Tear resistance
27 N/mm
Tensile strength
14 MPa
Elongation at break
600%

Typical properties; not to be construed as specifications.
ISO 34-1 Methode B, DIN 53504/ISO 37.